Well, The Mr2 Broke Pretty Bad (Did Not Expect That)


  • Dude, drop the stupid weights and get rear wheelie bars.

    UTbCanSkMyBawlzUTbCanSkMyBawlz27 күн мурун
  • Kyle you need to do this to the mr2 kgflow.info/title/q5h_1miWdWaNd3A/video

    moon dowgmoon dowgАй мурун
  • All the best Bro. hope to see MR2 back in action.

    Amir NazirAmir NazirАй мурун
  • How about lowering the boost? I mean is it really necessary causing potentially irreversible damage then having to start all over from scratch? So y'all are definitely successful no doubt that's been proven but clearly there are just 1 too many minor details that is costing you time and money. If the boost was lowered it would stress the puppy less. And in the event something were to fail it wouldn't be as catastrophic/costly. How much does my opinion matter? None With that being said turn up the boost to the max and continue to gather footage because honestly, whether it's a good day or a not so good day, that's why we're all hear for. Good luck fellas.

    7SENT7SENT2 ай мурун
  • Like breaking a Honda transmission is a new thing. Comon problem. Replace it with a stronger one. Move on.

    Kennith ChapmanKennith Chapman2 ай мурун
  • We want that world record man set that beast up and get that record you can do it !

    Jay JamesJay James2 ай мурун
  • Didn't expect that? Have you seen your channel at all?

    New VintageNew Vintage2 ай мурун
  • build a fan car under the front of the car.

    SimonTrent8000SimonTrent80002 ай мурун
  • Be so sweet if you just stuffed a J32 in it

    Aaron VandervoortAaron Vandervoort2 ай мурун
  • I think riveting a thin sheet metal underneath would cut down so much drag and kill that pocket of air in the front

    Samuel FooteSamuel Foote2 ай мурун
  • Put tha envelope on the GEO. HONDA MOTOR+VW muffler, and have you self a flying object. Keep up good content BigBoi. DSM#☝

    Ramón AquinoRamón Aquino2 ай мурун
  • Get a set of scales. It will give you a benchmark that you can work from.

    Russell WallbankRussell Wallbank2 ай мурун
  • haha the space X tune

    Patrick C.Patrick C.2 ай мурун
  • time for a Lamborghini nose spoiler

    crmercercrmercer2 ай мурун
  • Buusted Boiz ???

    The Dank DiggerThe Dank Digger2 ай мурун
  • Sounds like they took the alternator belt off at the track🤔

    Lachlan SutherlandLachlan Sutherland2 ай мурун
  • for sure it was the wheelie, that was wild

    SacrosanctRiderSacrosanctRider2 ай мурун
  • 12:40 Music at the end? Always hear it, never know if its a full track or just a custom end tune?

    Andy KnowlesAndy Knowles2 ай мурун
  • maibe support the front and the rear of the box with an engine plate , that way there isnt any weight hanging off the clutch housing or the driveshafts / diff torquing up the box against the engine plate in the middle , during the wheelie the rear wheels did come off the ground and landed spinning on the sticky stuff , verry good chance the ting was allready broken , goo thing the belt broke , think running that a second time wouldve hurted the gears inside it and probably the shifting mecanism too maibe you can make a deal with fasterprom and trade youre twin system with the header for their single one on the smart car

    watahyahknowwatahyahknow2 ай мурун
  • Would think the wheelie had some to do with it. If you can, ask Kevin at KSR what you could to make that stronger without going billet. Dude knows his stuff and is part of Cleetus gang.

    seanp777seanp7772 ай мурун
  • On the new bell housing before you transplant it I would cnc some gussets up and re·in·force it

    rjc862003rjc8620032 ай мурун
  • Pretty sure slamming the car down hard is what caused the bell housing to crack.

    Chris WymanChris Wyman2 ай мурун
  • The nut on your shoot release was turning when you were 2 stepping. Idk if its supposed to but incase its not tighten that bitch up lol

    Darth ShawDarth Shaw2 ай мурун
  • so how much longer till you quit fuckin around and just get wheelie bars? lol

    Paul AguirrePaul Aguirre2 ай мурун
  • Wheelie bars kyle!!!!

    It's_just_Me!It's_just_Me!2 ай мурун
  • Does a wheelie bar put you in a different class? Why don't you put one on to control the nose coming up?

    liftedlifted2 ай мурун
  • Would still love to see it with wheelie bars!!

    Brian KoganBrian Kogan2 ай мурун
  • 3agte is the solution of all yours problems

    Still NissanStill Nissan2 ай мурун
  • Please add ducting to the intercooler! My ocd can't take it

    Dr. Mantis TobogganDr. Mantis Toboggan2 ай мурун
  • 6:50, it was at this moment he realized he f***** up

    Levi KelleyLevi Kelley2 ай мурун
  • Ruby engine??

    ShifuShifu2 ай мурун
  • I wonder if they make a proximity sensor or radar sensor that would fire down, it would prob be able to record height and arrest spark as needed. Like using a parking sensor but down facing. Seems like it would be way more simple than the laser setup. Lasers are pretty sensitive and I bet they dont like the violent shaking of a drag car. Just an idea.

    Ralph MentaRalph Menta2 ай мурун
  • Wheelie bar . for the trackk.... !!!

    Omar MOmar M2 ай мурун
  • Too many ugga duggas on the bell housing

    Sam ShipleySam Shipley2 ай мурун
  • 1. wyatt is a calming and sensible part of chan✅ 2. I really am here to see Leslie bounce off a jetski

    mookie wilsonmookie wilson2 ай мурун
  • You can go ahead and send me that AEM when you're done with it...I'll put it to good use!

    Patman PerformancePatman Performance2 ай мурун
  • Race cars always find a weak spot, fix and find another one. Good luck 🍀👍 you guys, love the channel.

    Greg SimonGreg Simon2 ай мурун
  • Back In the day the bell housing would’ve been done

    Chris AracenaChris Aracena2 ай мурун
  • Can you lighten the rear any like a aftermarket k or tube rear k?

    Rawr SquadRawr Squad2 ай мурун
  • This was a good time to promote a “ Wyatt get the tool box “ t shirt 😂😂

    Austin FarrAustin Farr2 ай мурун
  • move the back wheels back a few inches.

    shartneshartne2 ай мурун
  • Holy crap...time for a billet bell-housing/ tube front end 4-link and 9"...lol

    Jason HellerJason Heller2 ай мурун
  • Boostedboiz plz keep it twin turbo I think it has alot more potential even if its compounding off each other I feel it has more

    Rocket TimeRocket Time2 ай мурун
  • Hi Kyle, you need to make the engine and gearbox part of the roll cage to make a stronger chassis structure. It's like starting from scratch with the chassis but it might be the right way to fix the problem. I hope the MR2 continues on the tracks breaking records

    JoseCJoseC2 ай мурун
  • Should maybe put a heavy-duty splitter on the front like you did on the hatch. You can make it modular to include removable weights. That way the weight would be about as far foward it can get n give u more options as far as the weight you can add or subtract.

    Jason HellerJason Heller2 ай мурун
  • I think every youtuber that has a facebook *ding* noise should be demonitized. lol

    Eric DugginsEric Duggins2 ай мурун
  • jb weld and go again for the next meet.

    HookemupsHookemups2 ай мурун
  • Please do that outro every time. 😂

    Phil PennaPhil Penna2 ай мурун
  • Please go to motec it’ll change your life

    JayJay2 ай мурун
  • please keep the twins! just easy on the full sends. dial in the launch first then slowly crank her up. love this build

    Colin ClarkeColin Clarke2 ай мурун
  • Keep your head up Kyle.

    Justin PlettJustin Plett2 ай мурун
  • Bro just fab up some wheelie bars haha

    Chris HernandezChris Hernandez2 ай мурун
  • Could that bellhousing plate cauce problem? Hard mounting and if it flex it could cause unusual stress to bellhousing?

    RandomRandom2 ай мурун
  • Dont believe 2nd fastest. No way he knows every person out their who has the same setup and is making better or faster passes. Shitty driver

    Ragged RidezRagged Ridez2 ай мурун
  • Reviewing the video of the infamous wheelie, I think it was that cause the bell housing to cracked, it landed on that metal plate and had a tiny crack...im pretty sure! Since the 4 tires was off the ground

    Corrado RacerCorrado Racer2 ай мурун
  • the "Cursesuader" new name for the mr2. Perhaps its too stiff having that mid-plate on! or just use some bushings at the end so it will give it a lil flexibility! who knows but give it a try...fact is: it was holding several passes, so by throwing a lil bushing will help it may be?

    Corrado RacerCorrado Racer2 ай мурун
  • What’s the advantage of a big single over twins?!

  • If the mr2 not boost by gear you should try setting that up

    hammertyme 561hammertyme 5612 ай мурун
  • I wanna see the lude in florida

    get wreckedget wrecked2 ай мурун
  • Did you ever see the other mr2s hitting faster times take a look dude get some love

    Adam Honda98Adam Honda982 ай мурун
  • New to your channel, been watching your early stuff and new stuff. I don’t see Charlie on the newer content. What happened to Charlie? He was OG correct?

    David BieberDavid Bieber2 ай мурун
  • Why no wheels bars ?

    William VenturaWilliam Ventura2 ай мурун
    • Wheelie bars

      William VenturaWilliam Ventura2 ай мурун
  • You could try to get more support points to the plate maybe to the other half of the trans

    SmackvttvSmackvttv2 ай мурун
  • Bye Wyatt

    BOT BRADBOT BRAD2 ай мурун
  • @ 6:38 couldn't tell if he was playin then looked like Wyatt was smiling....guess that was a grimace

    Jason HaleyJason Haley2 ай мурун
  • The mid plate should probably be all the way around the bell housing and not just to the bottom? Or is it attached to the top as well? Hope you guys figure it out.

    kraftaronikraftaroni2 ай мурун
  • Byyyyyeeeee Wyatt

    KID,TURBOKID,TURBO2 ай мурун
  • Guy sends you a solution for the willy that pulls timing... Kyle: nah I'm going to just keep sending it... Being the first is never easy, and as the good old say goes... failing is the path to success.

    Armando Rodriguez JrArmando Rodriguez Jr2 ай мурун
  • As much as you boys have accomplished already I have faith you'll get her back where she needs to be and even faster...

    Mjr BurnMjr Burn2 ай мурун

    JakeIsWayBlackJakeIsWayBlack2 ай мурун
  • time for wheelie bars

    sennaBlamsennaBlam2 ай мурун
  • Im not trying to look at your face

    Sargvision831Sargvision8312 ай мурун
  • Your in our prayers hoho how

    Sargvision831Sargvision8312 ай мурун
  • Should've bought a Volvo 🙂

    Grim ReaperGrim Reaper2 ай мурун
  • Honestly I’m over mr2 content it’s a cool car but it’s been nothing but it past year and half

    Tristan MiersTristan Miers2 ай мурун
    • Someone finally said it!!

      Juan SanchezJuan Sanchez2 ай мурун
  • Two thoughts I've had about keeping the front end down at launch are as follows: 1) If you strictly are adding dead weight to the front, make it so it's a lead slug or ball inside a tube, running as far back the length of the car as you want the weight to end up once you have traveled a particular speed or distance down the track. Maximum weight starts on the nose, but moves backward by g-force as you accelerate, to where you want it, weighing the nose down at the beginning, but sliding backward and being slowed/stopped with some adjustability, generating a force which pulls the nose down at a tunable time, according to where during launch it stops moving rearward, kind of like an automatic, momentary tap of the brakes. Angling the tube from as low as possible in the front, up as high as works best once dialed. Any angular adjustability should add some tunablility and make returning the weight to the front easier. Use springs or shock cord or something to stop and reverse the force and direction of the weight, in a controlled way, moving it back toward the front. Make a ramrod to force the weight the rest of the way forward, from the rear, to ensure it is as far forward as possible at next launch. 2) If you want to maximize the weight you need to add to the front, duct powerful, high CFM/low-weight fan/s in the front compartment, so that it sucks large amounts of air from beneath the car, up through the hood/decklid. Straight at the bottom for maximum suction and slightly raked backward at the hood exit for reduced drag and propulsion. Shut it off after launch and reduce drag by using electric rams to close the metal doors you cut out of the hood for ducting.

    Justin CaseJustin Case2 ай мурун
  • Could’ve done more damage so not really 3 steps back better catch it now than the whole thing blow up on the track

    Johnny HurtadoJohnny Hurtado2 ай мурун
  • If I had to guess I’d say the suspension being upgraded transmitted the shock load of the gear change to the bell housing. The old suspension rubbers would have absorbed some of the shock.

    Mi ckMi ck2 ай мурун
  • JB weld it

    Alan WrobleskiAlan Wrobleski2 ай мурун
  • I don't get that height sensor hype. Wouldn't it be easier to build wheelie bars and get them to work. Around here even 8,5s street class cars run them and they are FR drivetrain cars (old datsuns, toyotas, volvos and euro fords)

    vippe's garagevippe's garage2 ай мурун
  • Seems to me like a set of wheelie bars would solve the problem.

    James Gang RacingJames Gang Racing2 ай мурун
  • Im sure thats from the wheelie. it bent the chassis then cracked the bell housing.

    Thomas StricklandThomas Strickland2 ай мурун
  • Damn, things broke. Love the channel

    Zy TschirhartZy Tschirhart2 ай мурун
  • I love Wyatt, I miss every time the camera hit him it was “Sup fuckers” 🤣😂

    ZaimokuZaimoku2 ай мурун
  • FUELTECH is the way🇺🇸

    l ll l2 ай мурун
  • straight cut gears just singin, i love it

    Devon FDevon F2 ай мурун
  • Part 2, swapping everything into the red mr2

    Aus0924Aus09242 ай мурун
  • Are the motor and trans mounts solid? Because if not the mid plate is doing all their jobs and taking 100% of the shock. I would put bushings where it mounts to the chassis.

    NCLocalmediaNCLocalmedia2 ай мурун
  • Does the mr2 have solid engine mounts? If not then that mid plate is basically acting as a solid engine mount and taking all the stress from trying to shoot the car to the moon...

    Addison0526Addison05262 ай мурун
  • On the twin ebay's is the big thing about those 8's that I find special.....👏👏👏

    Winston PrattWinston Pratt2 ай мурун
  • 165 trans split in half and didn't notice that's quality right their

    Taylor CarsonTaylor Carson2 ай мурун
  • I’m sure there is a reason, but why not wheelie bars??

    djrepercussiondjrepercussion2 ай мурун
  • kgflow.info/title/jGiA3Wd6k4d9ioU/video

    Gressi 99Gressi 992 ай мурун
  • It wasn't caused by the wheelie you bunch of dummies, its was caused by the front end slamming the ground when it came down! Get ahold of me if you have any more questions!!! If you wanna prevent anymore wheelies, grease the rear tires! That's all the tricks I'm gonna share with you without being on payroll "Super Dave"

    Dave Van GemertDave Van Gemert2 ай мурун
  • Should turbo my 06 honda pilot 😂

    Nolan SpringerNolan Springer2 ай мурун
  • You are in the middle of the season arent you? If you pull it for the big work now it will be it for the season. Yeah it was the wheelie for sure!

    Westie 4AGE Turbo.Westie 4AGE Turbo.2 ай мурун
  • Ok so now is the time to set the mr2 up for the record and shut the h8trz up .

    Jay JamesJay James2 ай мурун
  • Take a page from Cleeter... make a shirt deal out of this boo boo and sell it to support the mr2

    Jacob PreedinJacob Preedin2 ай мурун
  • "it would have helped" "but it would have taken so much time to get it setup" bro come on all you have is time youtube is your job

    TT2 ай мурун
    • Its the lack of knowledge i think. I use to watch this channel alot but it seems like he gets one pass and the car breaks. Every time. A lot of go fast parts buts no knowledge of how there supposed to go together.

      baby jakebaby jake2 ай мурун
  • Since the white mr2 will get a different set up, throw the current into the red mr2 lol

    Angel TorresAngel Torres2 ай мурун